Products

DESCRIPTION

Basic Info

Laser Classification	Gaseous Laser
Laser Technology	Laser Control Fault Cutting
Laser Cutter Type	Fiber-Optic Laser
Cutter Wavelength	1064 Nm
Frequency	50Hz
Y Axis Travel	2020mm
X Axis Travel	4020mm
Maximum Empty Speed	60m/Min
Z Axis Travel	100mm
Transport Package	Wooden Package
Specification	2000W
Trademark	EN-SOURCE
Origin	China, Zhejiang
HS Code	845610009
Production Capacity	500

Product Description

High Power 2000W Metal CNC Fiber Laser Cutting Machine for Metal

I.Company Products Introduction:The company mainly produces three types of products, including CNC turret punch press (servo type, hydraulic type, mechanical type), laser cutting machine (YAG and optical fiber), flexible processing production line in sheet metal industry, with more than 30 products. The products are widely used in cold stamping processing industry, such as electric control cabinets, kitchen equipment, lamps, lid making, tank production lines, instruments, solar water heaters, battery iron plates, architectural decorative plates, auto parts, metal furniture, mufflers, screens, etc.II.Laser Cutting Machine Photo:
III.Laser Cutter Equipment Main Configuration

No.	Name	Origin and manufacturer name
1	Fiber laser cutting machine generator(2000W)	Rui Ke
2	Special laser cutting head (auto focus)	Shanghai Jiaqiang
3	Cuting machine bed (steel plate welding)	Self-produced
4	Beam	Integrated welding beam
5	Guide	Taiwan HIWIN
6	Reducer	France Motoly
7	Gear, rack	Taiwan K.H
8	Servo motor and driver	Japan Panasonic
10	Control cabinet	Self-produced
11	Low-voltage electrical appliances	Chint
12	Origin, limit switch	Swiss Carole
13	Cable	Flexible shielded cable
14	Transformer	Shenzhen Xinbei Ocean
15	IPC	Taiwan Advantech
16	Monitor	United States Dell
17	CNC system (including control software, height controller)	Shanghai company
18	Oil road	Electric oil pump
19	Gas circuit (proportional valve)	NNT
20	Chiller	Han Li

Configuration 1 introduction:(1)The fuselage is welded 12mm carbon steel welded, after rigorous stress relief annealing heat treatment.
(2)More scientific design and high-strength steel-frame structure, which increase the fuse large strength more than 40% to prevent the machine from distortion during long time work. That can make sure the machines' stable and reliable working performance.
Configuration 2 introduction:Raycus lasers has higher electro-optical conversion efficiency, higher and more stable optical quality, stronger altitude stress-resisting capacity to ensure more stable and more sophisticated cutting, working life of 100,000 hours.

IV.Main Technical Parameters of Fiber Laser Cutting Machine

No.	Device model	GX4020-2000W
1	Laser cutter type	fiber-optic laser
2	Laser working medium	optical fiber
3	CNC laser cutter wavelength	1064 nm
4	Rated output power	2000 W
5	Beam quality	<0.373mrad
6	X axis travel	4020mm
7	Y axis travel	2020mm
8	Z axis travel	100mm
9	Effective cutting range	4000×2000mm
10	Workbench axial positioning accuracy	≤±0.05mm/m
11	Worktable repeat positioning accuracy	≤±0.02mm/m
12	Maximum empty speed	60m/min
13	Workbench maximum load	2000KG
14	Phase	3
15	Power supply rated voltage	380V
16	Frequency	50Hz
17	Total power protection level	IP54

V.Cutting Metal Performance Table:

Material	Thickness(mm)	Speed(m/min)	Power (W)	Auxiliary gas
Stainless steel	1	35	2000	air
	2	10	2000	air
	3	6.5	2000	air
	4	4	2000	air
	5	2.4	2000	air
	6	1.6	2000	air
	8	0.9	2000	air
	1	30	2000	N2
	2	9	2000	N2
	3	6	2000	N2
	4	3.2	2000	N2
	5	2	2000	N2
	6	1.2	2000	N2
	8	0.6	2000	N2
Carbon steel	1	9	2000	O2
	2	4.2	2000	O2
	3	3.8	2000	O2
	3	3	2000	O2
	4	3.3	2000	O2
	4	2.8	2000	O2
	5	2.6	2000	O2
	6	1.8	2000	O2
	8	1.3	2000	O2
	10	1.1	2000	O2
	12	1	2000	O2
	14	0.9	2000	O2
	16	0.8	2000	O2
Brass	1	25	2000	N2
	2	7.5	2000	N2
	3	3.5	2000	N2
	4	1.8	2000	N2
	5	0.8	2000	N2
Aluminum	1	30	2000	N2
	2	8	2000	N2
	3	4	2000	N2
	4	2.5	2000	N2
	5	2	2000	N2
	6	1	2000	N2
	8	0.6	2000	N2
	1	30	2000	Air
	2	9	2000	Air
	3	3.2	2000	Air
	4	2	2000	Air
	5	1.4	2000	Air
	6	0.8	2000	Air
Copper	1	12	2000	O2
	2	4	2000	O2
Galvanized sheet	1	25	2000	N2
	2	9	2000	N2
	3	4.5	2000	N2

Remarks: The above metal laser cutting machine data is for reference only, please refer to the site conditions in actual use; and must match the following requirements.Focusing lens and protecting lens are very clean.The purity of the cutting auxiliary gas must match: O2: 99.95%; N2: 99.99%.The machine is properly maintained and the parameters are adjusted reasonably.The sheet meets the laser cutting requirements (smooth surface; no rust, no paint, etc.).VI.Laser Cutting Machinery Services1.Pre-sales services: it includes the buyer's engineering and technical personnel, user department, supply department to inquire about laser equipment, process experiment of sample parts, equipment selection, etc. This service is free of charge.
2.Installation and training: After the equipment is delivered to buyer factory, the supplier is responsible for the laser cutting machine installation, commissioning and delivery of the site on the demand side with the assistance of the demand side, and brings the necessary special tools and debugging tools. And the engineer will train operation and maintenance worker again. The training content includes:Laser safety protection common senseThe basic principle of laser and the structure of laser cutting machineOperating skills of control systemsEquipment operation and precautionsRoutine equipment maintenance, laser adjustment and spare parts replacement operation skillsThe training time is about 5 days3. Equipment acceptance: After the contract is signed, the supplier designs and manufactures the equipment strictly in accordance with the technical specifications of the contract. After the equipment is manufactured and manufactured, the demand side performs pre-acceptance on the equipment according to various technical indicators at the location of the supplier. After the equipment is installed and commissioned on the demand side, both parties conduct final acceptance of the equipment feasibility, stability and reliability according to the pre-acceptance standards.4. After-sales service: The company provides a two-year warranty and lifetime maintenance on the products purchased by the buyer. During the warranty period, the equipment is faulty and the machine parts are damaged (except for human factors and force majeure factors), the supplier is responsible for free repairs, and the required replacements are provided by the buyer free of charge (except consumable parts). After the warranty period, only the actual maintenance cost will be charged for maintenance.5. Packaging and transportation: The supplier meets the domestic railway or highway transportation packaging standards on the packaging. It is suitable for long-distance bus transportation or train transportation. It is moisture-proof, rust-proof, shock-proof and rough-proof loading and unloading, suitable for overall lifting. Each part of the equipment is packed according to relevant standards, and each packing box has a detailed packing list.VII. The Exhibition Photos: